引用本文
  •    [点击复制]
  •    [点击复制]
【打印本页】 【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 282次   下载 242 本文二维码信息
码上扫一扫!
正交试验优选双葛止泻颗粒一步制粒工艺
李焕娟,周冰,段飞燕,桑卡娜,张晓会,刘雅菲,陈帅韬,周德刚
0
(洛阳惠中兽药有限公司)
摘要:
本试验旨在优选双葛止泻颗粒一步制粒工艺,为双葛止泻颗粒研制与产业化提供理论依据。以浸膏的相对密度、进风温度、输液频率和雾化压力为考察因素,以合格颗粒的收率和休止角为综合评价指标,采用L9(34)正交试验法,对双葛止泻颗粒一步制粒工艺进行优化,并进行三批工艺验证。结果显示,最优制粒参数为:浸膏的相对密度为1.20(70 ℃),进风温度为70 ℃,输液频率为4 Hz,雾化压力为0.15 MPa。结果表明,优选的双葛止泻颗粒一步制粒工艺稳定,重复性好,可用于工业化生产。
关键词:  双葛止泻颗粒  一步制粒  正交试验
DOI:
投稿时间:2023-11-18修订日期:2024-07-05
基金项目:
Optimization of One-step granulating Process of Shuangge Zhixie granules by Orthogonal Experiment
(Luoyang Huizhong Animal Medicine Co.,Ltd)
Abstract:
In order to optimize the one-step granulation process of Shuangge Zhixie granules and provide a theoretical basis for the production process of Shuangge Zhixie granules. This study utilized the ratio of qualified granules and angle of repose as evaluation indexes,designed L9(34)orthogonal experiment with four factors of relative density of liquids, inlet-air temperature, infusion frequency, and spray pressure of the extract are considered factors as evaluation indexes, with three parallel validation tests being conducted. The results showed that the optimum granulating parameters were as follows: the relative density of liquids was 1.20(70 ℃),the inlet-air temperature was 70 ℃, the infusion frequency was 4 Hz, and the spray pressure of the extract was 0.15 MPa. Thus, the optimized one-step granulating process of Shuangge Zhixie granules is stable, reproducible, and applicable for industrial production.
Key words:  Shuangge Zhixie granules  one-step granulating  orthogonal experiment

用微信扫一扫

用微信扫一扫